Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: General PC Building

  1. #1
    Join Date
    Jul 2010
    Posts
    3,021

    Default General PC Building



    You knew it would come to this...Posted this in the chat awhile ago, but figured it couldn't hurt much to post a thread with the lack of activity.

    I make it no secret how much I love all things Jem, and it has culminated in the craziest thing I've ever attempted since that AMV project. If nothing else it is something TRULY Outrageous! This project occurred over two-three months over on the gamefaqs pc board - can't thank those guys enough. https://gamefaqs.gamespot.com/boards/916373-pc/76958124

    Since the video I've been making/planning some more additions such as...




    https://www.ebay.com/itm/173678914463

    ^ Put that on the power supply, or attempt to route the rest of those cables so I can put it at the bottom.

    https://www.ebay.com/itm/273550429822

    I would like it in the middle of that side panel, but how could I safely mount it on there?

    I could also get ahold of a custom logo, and then mail it to Samantha newark (Jem's talking voice) to sign and put there.

    Anyone have any suggestions on things I could do, or how to do the things I plan later?
    Last edited by N.P.C.C.; 12-14-2018 at 04:43 AM.

  2. #2
    Join Date
    May 2009
    Location
    Ult. Seabed Lower Levels
    Posts
    3,768

    Default

    Needs MOAR GLITTER!! STRIPPER HERPES EVERYWHERE!!!

    Code:
    We don't compromise. You shouldn't either.
    	If guns kill people, then...
       -Pencils miss spel words.
      -Cars make people drive drunk.
    -Spoons made Rosie O'Donnell fat.

  3. #3
    Join Date
    Jul 2010
    Posts
    3,021

    Default

    Think I poisoned myself enough with that stuff, and would rather not subject myself to the awkward looks of the store clerk at Menards getting more.

  4. #4
    Join Date
    May 2010
    Location
    USA
    Posts
    4,003

    Default

    To help you remain tranquil in the face of almost certain death, smooth jazz will be deployed, in three, two, one...


  5. #5
    Join Date
    Jul 2010
    Posts
    3,021

    Default

    Did I do something horribly wrong, or right? O_o

    Had nothing better to do last night, so cable managed some more, and managed to clear the bottom of the case. Should have room to mount something there.
    Last edited by N.P.C.C.; 12-12-2018 at 02:21 PM.

  6. #6
    Join Date
    May 2010
    Location
    USA
    Posts
    4,003

    Default

    Nah it's neat, just kidding around.
    To help you remain tranquil in the face of almost certain death, smooth jazz will be deployed, in three, two, one...


  7. #7
    Join Date
    Jul 2010
    Posts
    3,021

    Default

    Appreciate it - honestly a vomiting pony can count as either indication.

    Finally got to giving me secondary rig "Green Machine" 2.0 some tlc.






    Cableling was a tad reckless, but left just enough room to lay a race track down.

  8. #8
    Join Date
    Jul 2010
    Posts
    3,021

    Default



    Right now trying to think of a clear way to mount it - the bottom of the case is clear now, and would hide cables, but i'd need some strong zip tie game to do it there.
    Last edited by N.P.C.C.; 01-01-2019 at 11:40 AM.

  9. #9
    Join Date
    Feb 2011
    Location
    A short drive from Chicago
    Posts
    71,533

    Default

    Well if you don't want her to move, some good double sided tape does wonders. I use that on my RC cars to hold down do the receiver, can't have things move when it's moving at 70+ MPH

  10. #10
    Join Date
    Jul 2010
    Posts
    3,021

    Default

    The bottom i cleared has another fan mount with holes (which is why zip tie was the first thing) Will that tape hold up when i have to tip the case over to do maintenance, or would i have to re do it?

  11. #11
    Join Date
    Feb 2011
    Location
    A short drive from Chicago
    Posts
    71,533

    Default

    The tape is not reusable but when I buy it there is more than enough so you could just put some fresh tape on when needed. Now what would be another neat trick is to install some small magnets to hold her down, then you could move her without issues.

  12. #12
    Join Date
    Jul 2010
    Posts
    3,021

    Default

    I have two small ones left over from the jem star earnings magnetized to the case. That's what you are getting at?



    Last edited by N.P.C.C.; 01-02-2019 at 11:28 PM.

  13. #13
    Join Date
    Jul 2010
    Posts
    3,021

    Default



    My cooler's push pins were too damage to mount correctly, and was hitting damn near 100c at idle. I bought some extra push pins a while ago, and have to attempt to replace them. This will be a new one, and amazing how easily push pins break.

    Edit: Done...I remembered what mad said about where i put the cooler, and wanted it at the spot people usually put it.(To the right) The issue is my ram wasn't allowing it.Since i just figured out i could lift the fan up a bit i'll try to put it in the right direction next time...The paste i have is an absolutely terrible substance that I don't want on my hands again any time soon.



    I'm about done. For obstacles in the basement, and a logo for glamour and glitter I want to use a 3D printer if possible.
    Last edited by N.P.C.C.; 01-08-2019 at 01:30 PM.

  14. #14
    Join Date
    Jul 2010
    Posts
    3,021

    Default

    Change of plans.





    Don't know if it's the angle, but she looks hella evil...

  15. #15
    Join Date
    Jul 2010
    Posts
    3,021

    Default

    3D Printed stuff a friend sent me finally came.







    - Gotta lay new tape down again I think.
    -Hope double sided tape was strong enough for that stuff.
    Last edited by N.P.C.C.; 02-15-2019 at 12:06 PM.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •